Clearwater Industries custom builds Flocculant Mixing Systems to conform to plants with existing polymer tanks and flocculant mixers. The Model 150 is a dry polymer feed system only. This system is ideal for:

• Large Aggregate Producers.
• Paper Mills.
• Oil Refineries
• Waster Water Treatment Plants.

Features:

• Custom built to control existing mixers, valves, & polymer injection systems
• Creamy solution with full uncoiling and no fish-eyes.
• 6 cubic foot stainless steel hopper for multiple 55# bags.
• Variable speed screw feeder with solid shaft auger.
• 2 HP inverter duty motor and 5.57-1 gear reducer drives the screw feeder.
• Low water pressure protection, run dry protection, low polymer alarm.
• 25 gallon per minute funnel pump and 2 HP motor moves solution to the customers existing flocculant make down equipment.
• Two, pneumatic actuated valves control water to and from the funnel pump.
• Allen-Bradley Panel View Display and PLC, provides manual or automatic operation of polymer mixing system.
• Flocculant Make Down System is fully automatic, batching continuously.

Clearwater Industries can:

• Integrate our flocculant metering equipment to the plant control center.
• Provide hoppers for 55# bags or "Super Sacks".
• Supply vendor data, submittal drawings, inspection matrix, project schedule, technical summary, and instrumentation specification sheets.
• Include commissioning/start up services, with recommended spare parts list.
• Physically install, wire, and plumb the system in your plant.

Optional Features:

• Optical Sensor or Coriolis Meter to measure solids loading for automatic dosage control.
• Multiple Polymer Metering pumps.
• 3-Way Valves, Mechanical Prop Mixers, Level Sensors, or any item that the customer requires.

Utilities:

• One point electrical hook-up, 460/230 volt 3-phase, 120 volt or 24 volt DC control logic, or customer to specify.
• One point clean water hook-up, 1-1/2" line at 25 to 80 psi.