|
The Clearwater Industries Model 500 Polymer Metering and Injection System is designed to make down either dry or emulsion polymers that will rapidly settle suspended solids out of wastewater. The Model 500 features an 817-gallon aging tank, which allows for 50 pounds per hour of dry polymer to be made down. This system is ideal for:
- Flocking solids out quickly in the first settling pond
- Flocking solids out in Clarifiers and Thickeners
- Thicken solids in Belt Presses
Features:
- Can be "up and running" 1 hour after unloading
- Solution without the formation of "fish-eyes"
- Stainless steel 110 lb. Hopper (200 lb. Hopper optional)
- Variable speed screw feeder with solid shaft auger
- Low water pressure protection
- Fully automatic, continuous batching operation
- One progressive cavity polymer disbursement pump. Variable speed pump drive with 4-20 mA inputs. Maximum pump delivery is 15 gpm
- Tank is constructed of rugged 1/2" polypropylene triple welded inside and out and is capable of holding 817 gallons of solution
- 3" square steel framework painted with aliphatic urethane epoxy paint, which yields a high chemically resistant finish that fades little under UV rays
- One tank design with internal baffle and weir is a simple design that assures proper mixing and aging of polymer
- Hand/Off/Auto switches provide manual or automatic sequencing
Optional Features:
- Allen Bradley Panel View display allows the controller push button controlling options
- Wedgewood Auto Floc Controller adjusts polymer dosage depending on solid content in wastewater
- Multi-gang manifold allows polymer solution to be pumped to several different locations
- Remote speed pot allows controller to adjust polymer pump speeds while away from the unit
Utilities:
- One point electrical hook-up, 460/230 volt 3-phase, or 240/120 volt single phase. Customer to specify
- One point clean water hook-up, 1-1/4" line at 25 to 80 psi
Dimensions:
- Framework is 5'(W) x 9-1/2'(L) x 7'(H)
- Approximate shipping weight is 1500 lbs.
|
 |
|
