|
The Clearwater Industries Model 512 Polymer Metering and Injection Equipment is a split tank system, which was designed for customers who utilize both dry and liquid flocculants. This unit is equipped with one stainless steel dry feed system and one neat chemical emulsion pump. Both chemicals receive adequate aging and mixing in their own chambers of the 817-gallon tank. This system is fully automated and is ideal for:
- Customers who require both cationic liquid and anionic dry chemicals
- Belt Presses and Clarifiers
Features:
- Can be "up and running" 1 hour after unloading
- Solution without the formation of "fish-eyes"
- 1" piston pump to deliver neat emulsions
- Stainless steel 110 lb. hopper (200 lb. hopper optional)
- Two stainless steel mixers each with two 10" stainless steel props.
- Low water pressure protection
- Fully automatic, continuous batching operation
- Two progressive cavity polymer disbursement pump. Variable speed pump drives with 4-20 mA input. Maximum pump delivery is 15 gpm
- Tank is constructed of rugged 1/2" polypropylene triple welded inside and out and is capable of holding 817 gallons of solution
- 3" square steel framework painted with aliphatic urethane epoxy paint, which yields a high chemically resistant finish that fades little under UV rays
- Single tank split design with internal baffle and weir is a simple design that assures proper mixing and aging of polymer
- Hand/Off/Auto switches provide manual or automatic sequencing
Optional Features:
- Allen Bradley Panel View display allows the controller push button controlling options
- Wedgewood Auto Floc Controller adjusts polymer dosage depending on solid content in wastewater
- Multi-gang manifold allows polymer solution to be pumped to several different locations
- Remote speed pot allows controller to adjust polymer pump speeds while away from the unit
Utilities:
- One point electrical hook-up, 460/230 volt 3-phase, or 240/120 volt single phase Customer to specify
- One point clean water hook-up, 1-1/4" line at 25 to 80 psi
Dimensions:
- Framework is 5'(W) x 9-1/2'(L) x 7'(H)
- Approximate shipping weight is 1650 lbs.
|
 |
|
